Cigar Accessories: A Practical Guide

Lighters:

Igniting the Lighter: A simple action on the ignition switch triggers a powerful flame exceeding temperatures of 2,000 degrees. Note that this flame may appear weak in bright lighting, so handle it with care.

Precautions: Avoid touching the top of the lighter after ignition to prevent heat buildup, especially during prolonged use exceeding 10 seconds. Excessive heat can damage the lighter or cause harm to the user.

Extinguishing the Flame: Releasing pressure on the ignition button stops the fuel flow, instantly extinguishing the flame. If the flame persists, adjust the flame level using the adjustment wheel located under the lighter.

Adjusting Flame Level: Use the fuel adjustment wheel to increase or decrease the flame height as needed. Turn the wheel towards the "+" sign to increase the flame and towards the "-" sign to decrease it.

Filling and Refilling the Lighter: Before refilling, release tank pressure by pressing on the inlet valve. Hold the lighter vertically and insert the butane bottle tip directly onto the fuel valve, avoiding shaking the bottle. After filling, wait 3 to 4 minutes before igniting the lighter to allow excess butane to evaporate.

Cutters

Hold the cigar cutter firmly using the first knuckle crook on one side and the length of your thumb on the other. Apply a firm, quick squeeze to cut the cigar effectively. Note that both sides operate independently, but ensure that both blades meet in the middle to cut the same amount of cigar.

Hygrometers

This unit measures humidity in the range of 20% to 95%. If humidity falls outside this range, the unit displays "--" to indicate unreadable humidity levels. It operates most accurately within the 60-80% humidity range.

Hygrometer Batteries

If your Rami's hygrometer fails to turn on, check and adjust the battery as follows: Open the battery cover and ensure proper installation and contact with the silver metal contact. Different Rami's hygrometers use different battery sizes; consult your specific model for compatibility.